Automatic Toilet Flush with Vacuum Breaker
Concealed installation with pre-programmed 2 stage flush sensor and manual override push button
Features:
Pre-programmed 2 stage flush cycle
Additional override push button with a 6 second flush
Touchless hygiene, minimises risk of cross-contamination
Self adjusting sensing range from 10 - 70cm (can be reprogrammed with optional remote)
Optional remote available to extend range or adjust flush cycle
No electrical wiring required, dual operation on either batteries or 240V or both.
Flush System:
The infrared sensor is programmed to activate a 3 second flush once in the detection zone, then a 6 second flush on exit.
The flush uses a timer to determine the length of the flush depending on the amount of time the sensor is engaged (the toilet is in use).
Specifications:
Connections: Large 25 mm 1” inlet and outlet for maximum flow
Sensor distance: 10-70cm (extended with optional remote)
Power: 4 x AA batteries lasting 2 years @ 200 starts / day (not supplied) or standard 240V 50Hz supply
Working pressure: 0.05 to 0.8 Mpa
Boxed Dimensions: 32 cm x 16 cm x 11 cm, packaged weight 2.1 kg
Extras:
Remote to reprogram flush cycle and sensing range
Downloads:
Manual
Installation Disclaimer:
This product must be installed in accordance with relevant Australian standards and requires a Vacuum Breaker to be installed on the outlet of the auto flush valve supplied with kit.
This product is not currently Watermarked.