Whetstone Knife Sharpening Grinding & Honing Machine Variable Speed
The combined use of the Water Cooled Grindstone, Leather Honing Wheel and the supplied tube of Honing Compound creates an edge that is polished to a razor sharpness. Sharpening a blade on the Wet Stone will prevent tempering or burning and softening of the blade whilst use of the Leather Honing Wheel after grinding removes any burrs that develop.
Features:
Industrial quality - made for rugged use by butchers, abattoirs and chefs
Will sharpen all other tools and blades
Convenient carry handle
Variable Speed Dial
Insulated 3 position switch - off, forward and reverse
Angled sliding guide - fitting in 2 positions (front and rear) to cover every size and angle
Sliding guide clamps - to securely and safely hold the work piece
Variable Angle guide
Spare parts:
Honing paste
Leather Honing Wheel
Grind Stone Wheel
Instructions:
This machine comes with a blade holder for large straight blades (mowers, axes, spades etc)
For a professional razor-sharp edge we recommend holding the blade in hand
No jig is used as blades are generally curved to some degree
Honing and polishing to a razor edge on a polishing wheel after sharpening on grinding wheel
We find users take a few tries, but generally get a better result and a better feel for what they are doing, when sharpening by hand
Downloads:
Specifications:
240V, 180W
Wheel speed: 90 - 160 r/min
Grinding stone grit: 220
Dimensions: 385 x 380 x 360mm
Weight: 16.5kg
Machine including and fitted with:
Grinding wheel - 250 x 12.7mm
Leather honing wheel - 200 x 30mm
Honing paste
Angled sliding guide and sliding guide clamps
Water reservoir
Variable Angle Guide Jig
Addons:
Complete Jig Set (Knife and Blade)
2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.
Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase
Warranty Claims Process:
- Notification: If you believe your product has a defect, please contact our customer service department at 07 3283 4536 or notify us in writing to info@mefe.com.au
- Proof of Purchase: Provide proof of purchase, invoice number or copy of tax invoice required.
- Inspection: If necessary, we may request you to return the defective product for inspection to determine the nature and cause of the defect. The cost to return the product may be at your expense.
Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.
Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.
Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.
Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
